Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 230.91...232.99 — Lexmark XM9155

Code: 230.91...232.99

Description: 230.91 The paper remains detected at the sensor (duplex pass through 1) after the printer is turned on. 230.93 The sensor (duplex pass through 1) did not detect the paper. 232.93 The paper remains detected at the sensor (registration) during a duplex job. 232.99 Skew correction did not complete at the registration roller during a duplex job.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: EVENT LOG > Display Log Do most of the recent error codes end with a 1? (Example: 241.11, 200.91) Go to step 2. Go to step 5. Step 2 Make sure that the duplex paper path, including the sensors, are free of debris or dust. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the duplex pass through 1 and duplex pass through 2 sensor actuator for damage, and replace if necessary. See “Duplex pass through 1 actuator removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the sensor (duplex pass through 1) and sensor (duplex pass through 2) for damage, and replace if necessary. See “Sensor (duplex pass through 1) removal” and “Sensor (duplex pass through 2) removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Enter the Diagnostics menu, and then navigate to: INPUT TRAY TESTS > Feed Tests > Tray 1 Does the leading edge of the paper reach the sensor (duplex pass through 1)? Go to step 6. Go to step 7. Step 6 Does the leading edge of the paper reach the sensor (registration)? Go to step 14. Go to step 13. Step 7 a Check the duplex transport belt for proper tension, and adjust if necessary. b Check the duplex transport gear and belt for wear or damage, and replace if necessary. See “Duplex transport belt removal” and “Duplex transport gears removal”. Does the problem remain? Go to step 8. The problem is solved Step 8 a Make sure that the duplex transport assembly is properly installed. b Make sure that the assembly is clear of obstructions. Does the problem remain? Go to step 9. The problem is solved. Step 9 Check the duplex transport assembly, including its rollers and guides for damage, and replace if necessary. See “Duplex transport assembly removal”. Does the problem remain? Go to step 10. The problem is solved. Step 10 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Duplex transport tray Does the motor run? Go to step 13. Go to step 11. Step 11 a Reseat the duplex transport motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 12. The problem is solved. Step 12 Replace the motor (duplex transport). See “Motor (duplex transport) removal”. Does the problem remain? Go to step 13. The problem is solved. Step 13 a Make sure that the registration unit is properly installed. b Check the unit, including the duplex pass through 2 and duplex exit rollers for wear or damage, and replace if necessary. See “Registration unit assembly removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Transport tray Does the motor run? Go to step 18. Go to step 15. Step 15 a Reseat the transport motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 16. The problem is solved. Step 16 a Check the transport motor belt for proper tension, and adjust if necessary. b Check the transport motor gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 17. The problem is solved. Step 17 Replace the motor (transport). See “Motor (transport) removal”. Does the problem remain? Go to step 18. The problem is solved. Step 18 Check the expansion controller board pins for damage, and replace if necessary. See “Expansion controller board removal”. Does the problem remain? Go to step 19. The problem is solved. Step 19 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark XM9155

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie