Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 242.93 — Lexmark XM9155

Code: 242.93

Description: The sensor (tray 2 transport) did not detect the paper from tray 3.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: EVENT LOG > Display Log Do most of the recent error codes end with a 1? (Example: 241.11, 200.91) Go to step 2. Go to step 7. Step 2 Make sure that the tray 3 feed paper path, including the sensors, are free of debris or dust. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the sensor (2 x 500.sheet tray 3 feed). Is it free of damage? Go to step 4. Go to step 6. Step 4 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > 2 x 500-Sheet Tray Sensor Tests > Tray 3 feed Does the sensor status change while toggling the sensor? Go to step 13. Go to step 5. Step 5 a Reseat the sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 Replace the sensor (2 x 500.sheet tray 3 feed). See g2 x 500-sheet tray transport assembly sensors removalh. Does the problem remain? Go to step 7. The problem is solved. Step 7 Enter the Diagnostics menu, and then navigate to: INPUT TRAY TESTS > Feed Tests > Tray 3 Does the leading edge of the paper reach the sensor (2 x 500.sheet tray 3 paper feed)? Go to step 13. Go to step 8. Step 8 Check the tray 3 feed, pick, and separator rollers for damage, and replace if necessary. Note: If the page count is over 50K, then clean the rollers. Does the problem remain? Go to step 9. The problem is solved Step 9 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > 2 x 500-Sheet Tray Motor Tests > Tray 3 feed Does the motor run? Go to step 17. Go to step 10. Step 10 a Reseat the motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Check the paper feed belt for proper tension, and adjust if necessary. b Check the paper feed gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 12. The problem is solved. Step 12 Replace the motor (2 x 500.sheet tray 3 transport). See g2 x 500-sheet tray feed and transport motors removalh. Does the problem remain? Go to step 13. The problem is solved. Step 13 Check the sensor (2 x 500.sheet tray 3 transport). Is it free of damage? Go to step 14. Go to step 16. Step 14 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > 2 x 500-Sheet Tray Sensor Tests > Tray 3 transport Does the sensor status change while toggling the sensor? Go to step 17. Go to step 15. Step 15 a Reseat the sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 16. The problem is solved. Step 16 Replace the sensor (2 x 500.sheet tray 3 transport). See g2 x 500-sheet tray transport assembly sensors removalh. Does the problem remain? Go to step 17. The problem is solved Step 17 Check the 2 x 500.sheet tray controller board pins for damage, and replace if necessary. See g2 x 500-sheet tray controller board removalh. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark XM9155

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie