Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 202.91...202.95 — Lexmark XM9165

Code: 202.91...202.95

Description: 202.91 The paper remains detected at the sensor (exit) after the printer is turned on. 202.93 The sensor (fuser exit) did not detect the paper. 202.95 The paper remains detected at the sensor (fuser exit) during a print job.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: EVENT LOG > Display Log Do most of the recent error codes end with a 1? (Example: 241.11, 200.91) Go to step 2. Go to step 8. Step 2 Make sure that the exit paper path, including the sensors, are free of debris or dust. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the exit sensor actuator for damage, and replace if necessary. See “Fuser exit sensor actuator removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the sensor (exit). Is it free of damage? Go to step 5. Go to step 7. Step 5 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > PRINTER SENSOR TESTS > Paper exit Does the sensor status change while toggling the sensor? Go to step 8. Go to step 6. Step 6 a Reseat the exit sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the sensor (exit). Does the problem remain? Go to step 8. The problem is solved. Step 8 Enter the Diagnostics menu, and then navigate to: INPUT TRAY TESTS > Feed Tests > Tray 1 Does the leading edge of the paper reach the fuser? Go to step 9. Go to step 10. Step 9 Does the leading edge of the paper reach the sensor (fuser exit)? Go to step 14. Go to step 13. Step 10 Check the registration roller for wear or damage, and replace if necessary. Does the problem remain? Go to step 11. The problem is solved. Step 11 a Make sure that the registration transport assembly is properly installed. b Make sure that the assembly is clear of obstructions. c Check the assembly for damage, and replace if necessary. See “Registration transport assembly”. Does the problem remain? Go to step 12. The problem is solved. Step 12 a Make sure that the registration unit is properly installed. b Make sure that the unit is clear of obstructions. c Check the unit for damage, and replace if necessary. See “Registration unit assembly removal”. Does the problem remain? Go to step 13. The problem is solved. Step 13 Check the fuser for wear or damage, and replace if necessary. See “Fuser removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 Check the fuser exit clutch for wear or damage, and replace if necessary. See “Fuser removal”. Does the problem remain? Go to step 15. The problem is solved. Step 15 a Make sure that the duplex transport assembly is properly installed. b Make sure that the assembly is clear of obstructions. Does the problem remain? Go to step 16. The problem is solved. Step 16 Check the assembly, including its exit roller and gears for damage, and replace if necessary. See “Duplex transport assembly removal”. Does the problem remain? Go to step 17. The problem is solved. Step 17 a Check the fuser belt for proper tension, and adjust if necessary. b Check the fuser gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 18. The problem is solved. Step 18 a Make sure that the exit guide assembly is properly installed. b Make sure that the assembly is clear of obstructions. Does the problem remain? Go to step 19. The problem is solved. Step 19 Check the exit guide assembly, including the rollers and diverter for wear or damage, and replace if necessary. Does the problem remain? Go to step 20. The problem is solved. Step 20 Check the diverter solenoid for proper operation. Check the solenoid for wear or damage, and replace if necessary. Does the problem remain? Go to step 21. The problem is solved. Step 21 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Redrive forward Does the motor run? Go to step 25. Go to step 22. Step 22 a Reseat the redrive motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 23. The problem is solved. Step 23 a Check the redrive belt for proper tension, and adjust if necessary. b Check the redrive gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 24. The problem is solved. Step 24 Replace the motor (redrive). See “Motor (redrive) removal”. Does the problem remain? Go to step 25. The problem is solved. Step 25 Make sure that the blue screws and marked screws in the paper path area are tightened. Does the problem remain? Go to step 26. The problem is solved. Step 26 Check the expansion controller board pins for damage, and replace if necessary. See “Expansion controller board removal”. Does the problem remain? Go to step 27. The problem is solved. Step 27 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved

← Xem tất cả mã lỗi Lexmark XM9165

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie