Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 242.21...242.91 — Lexmark XM9165

Code: 242.21...242.91

Description: 242.21 The paper remains detected at the sensor (tray 2 feed) after the printer is turned on. 242.26 The sensor (tray 2 transport) did not detect the paper. 242.91 The paper remains detected at the sensor (tray 2 transport) after the printer is turned on.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: EVENT LOG > Display Log Do most of the recent error codes end with a 1? (Example: 241.11, 200.91) Go to step 2. Go to step 7. Step 2 Make sure that the tray 2 feed paper path, including the sensors, are free of debris or dust. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the sensor (tray 2 paper feed). Is it free of damage? Go to step 4. Go to step 6. Step 4 Enter the Diagnostics menu, and then navigate to: SENSOR TESTS > PRINTER SENSOR TESTS > Tray 2 paper feed Does the sensor status change while toggling the sensor? Go to step 7. Go to step 5. Step 5 a Reseat the tray 2 paper feed sensor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 6. The problem is solved. Step 6 Replace the sensor (tray 2 paper feed). Does the problem remain? Go to step 7. The problem is solved. Step 7 Enter the Diagnostics menu, and then navigate to: INPUT TRAY TESTS > Feed Tests > Tray 2 Does the leading edge of the paper reach the sensor (tray 2 paper feed)? Go to step 8. Go to step 9. Step 8 Does the leading edge of the paper reach the sensor (tray 2 transport)? Go to step 15. Go to step 10. Step 9 Check the tray 2 feed, pick, and separator rollers for damage, and replace if necessary. Note: If the page count is over 50K, then clean the rollers. Does the problem remain? Go to step 10. The problem is solved. Step 10 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Paper feed Does the motor run? Go to step 14. Go to step 11. Step 11 a Reseat the feed motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 12. The problem is solved. Step 12 a Check the paper feed belt for proper tension, and adjust if necessary. b Check the paper feed gear and belt for wear or damage, and replace if necessary. Does the problem remain? Go to step 13. The problem is solved. Step 13 Replace the motor (feed). See “Motor (feed) removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 a Make sure that the paper feed drive assembly is properly installed. b Make sure that the assembly is clear of obstructions. c Check the assembly for damage, and replace if necessary. See “Feed drive assembly removal”. Does the problem remain? Go to step 15. The problem is solved. Step 15 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Tray 2 vertical transport Does the motor run? Go to step 19 Go to step 16. Step 16 a Reseat the tray 2 transport motor cable. b Check the cable for damage, and replace if necessary. Does the problem remain? Go to step 17. The problem is solved Step 17 a Check the transport drive belt for proper tension, and adjust if necessary. b Check the transport drive assembly for wear or damage, and replace if necessary. Does the problem remain? Go to step 18. The problem is solved. Step 18 Replace the motor (tray 2 transport). Does the problem remain? Go to step 19. The problem is solved. Step 19 Check the tray 2 transport roller for damage, and replace if necessary. Does the problem remain? Go to step 20. The problem is solved. Step 20 a Make sure that the tray transport guide is properly installed. b Make sure that the guide is clear of obstructions. c Check the guide for damage, and replace if necessary. Does the problem remain? Go to step 21. The problem is solved. Step 21 a Make sure that the paper feed unit is properly installed. b Make sure that the unit is clear of obstructions. c Check the unit for damage, and replace if necessary. Does the problem remain? Go to step 22. The problem is solved. Step 22 Make sure that the blue screws and marked screws in the paper path area are tightened. Does the problem remain? Go to step 23. The problem is solved. Step 23 Check the expansion controller board pins for damage, and replace if necessary. See “Expansion controller board removal”. Does the problem remain? Go to step 24. The problem is solved. Step 24 Check the engine controller board pins for damage, and replace if necessary. See “Engine controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.

← Xem tất cả mã lỗi Lexmark XM9165

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie