Code: 800.04
Description: A timing error occurred during a scan job at the front side of the document.
Remedy: Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Note: Do this step every time a service error would occur to clear the error and restore the engine settings. Does the error remain? Go to step 2. The problem is solved. Step 2 a Reseat the interface cable connecting the engine controller board and the image controller board. b Reseat all of the cables on the ADF controller board and reseat the cable connectors on the other end of the connection. c Make sure to tighten the blue screws and marked screws. d Check the cables for damage, and replace if necessary. Does the problem remain? Go to step 3. The problem is solved. Step 3 Check the ADF controller board for damaged pins, and replace if necessary. See “ADF controller board removal”. Note: Make sure to perform ADF scanner adjustment after replacing the ADF controller board. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the ADF/scanner image controller board for damaged pins, and replace if necessary. See “ADF/scanner image controller board removal”. Does the problem remain? Go to step 5. The problem is solved. Step 5 Check the controller board for damaged pins, and replace if necessary. See “Controller board removal”. Does the problem remain? Contact the next level of support. The problem is solved.