Code: 31
Description: Defective or Missing <color> Cartridge • Reseat the specified toner cartridge. • Inspect the smart chip card contacts (A) for damage, contamination or positioning error. If damaged, contact your next level of service. • Inspect the toner cartridge contacts for damage/contamination. Replace the toner cartridge if defective. • Replace the indicated cartridge.
Remedy: 1 POR the printer. Did this fix the problem? Problem resolved. Go to step 2. 2 Replace the toner cartridge. Did this fix the problem? Problem resolved. Go to step 3. 3 Reseat the toner cartridges and make sure they are installed to their correct color slots. Did this fix the problem? Problem resolved. Go to step 4. 4 1. Check the contacts on the toner cartridge chip for damage and contamination. 2. Clean the contacts. Are the chip contacts damaged? Replace toner cartridge. Go to step 5. 5 1. Check the cartridge contact and bell crank on the printer. 2. Press each of the contacts to check the spring force. 3. Check the bell crank for any damage. Are the bell crank and cartridge contacts damaged? Replace the cartridge contact with bell crank. Note: Only replace the parts that are damaged. Go to step 6. 6 1. Check JSB1 on the system board for proper connection. 2. Check for damage and pinch points on the connector. 3. Reseat cable. Is the cable connector free of damaged? Replace the cartridge contact with bell crank. Note: Only replace the parts that are damaged. Go to step 7. 7 Check the whole length of the cable going to the cartridge contact. Check for any damage and pinch points. Are the cables damaged? Replace the cartridge contact with bell crank. Note: Only replace the parts that are damaged. Go to step 8. 8 Replace the system board. See “System board removal”. Did this fix the problem? Problem resolved. Replace the cartridge contact with bell crank. Note: Only replace the parts that are damaged.