Code: 2121
Description: Black developer drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor.dev
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor.dev
Causes: Defective engine controller PWB (KP-801). Defective black developer drive motor. Excessive torque for driving black developer. (Overloaded by a damaged gear.) Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective black developer drive motor. Replace the black developer drive motor.
Excessive torque for driving black developer. (Overloaded by a damaged gear.) Check if the black developer rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals. Check the continuity of the harness (S02570). Check the insertion of connectors.
Defective black developer drive motor. Replace the black developer drive motor.
Excessive torque for driving black developer. (Overloaded by a damaged gear.) Check if the black developer rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals. Check the continuity of the harness (S02570). Check the insertion of connectors.