Code: 5300
Description: Eraser lamp broken detection
• The current at the correct level is not detected when ASIC (U8) on the engine controller PWB (KP-801) generates the signal to activate the eraser lamp.
• The current at the correct level is not detected when ASIC (U8) on the engine controller PWB (KP-801) generates the signal to activate the eraser lamp.
Causes: Defective engine controller PWB (KP-801). Defective drum unit (eraser lamp or drum PWB [KP- 813]). Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective drum unit (eraser lamp or drum PWB [KP- 813]). Replace the drum unit.
Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals. Check the continuity of the harness (S02575). Check the insertion of connectors.
Defective drum unit (eraser lamp or drum PWB [KP- 813]). Replace the drum unit.
Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals. Check the continuity of the harness (S02575). Check the insertion of connectors.