Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6000 — Kyocera FS8000C

Code: 6000

Description: Heat roller heating time-out 1
• The temperature on the heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has turned on the upper heater lamp. This is detected when the upper heater lamp is turned on.
Causes: Defective engine controller PWB (KP-801). Defective upper heater lamp. Defective upper thermostat. Defective fuser PWB (KP-811). Defective upper fuser thermistor, or fitting is not proper. Defective power supply unit. Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective upper heater lamp. Replace the fuser unit (upper heater lamp).
Defective upper thermostat. Replace the fuser unit (upper thermostat).
Defective fuser PWB (KP-811). Replace the fuser unit (fuser PWB [KP- 811]).
Defective upper fuser thermistor, or fitting is not proper. Replace the fuser unit (upper fuser thermistor).
Defective power supply unit. Replace the power supply unit.
Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals. Check the continuity the harness (S02572). Check the insertion of connectors.

← Xem tất cả mã lỗi Kyocera FS8000C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie