Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6010 — Kyocera FS8000C

Code: 6010

Description: Heat roller heating time-out 2
• The temperature on the heat toller does not reach the correct temperature within the predetermined period after self-diagnostic code 6000 is cleared. The period for detection is longer than the condition for selfdiagnostics code 6000.ne con
Causes: Defective engine controller PWB (KP-801). Defective upper heater lamp. Defective upper thermostat. Defective fuser PWB (KP-811). Defective upper fuser thermistor, or fitting is not proper. Defective AC power source (Abnormal low voltage). Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective upper heater lamp. Replace the fuser unit (upper heater lamp).
Defective upper thermostat. Replace the fuser unit (upper thermostat).
Defective fuser PWB (KP-811). Replace the fuser unit (fuser PWB [KP- 811]).
Defective upper fuser thermistor, or fitting is not proper. Replace the fuser unit (upper fuser thermistor).
Defective AC power source (Abnormal low voltage). Connect to the proper AC power source.
Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals. Check the continuity of the harness (S02572). Check the insertion of connectors.

← Xem tất cả mã lỗi Kyocera FS8000C

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie