Code: 7101
Description: Black T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
Causes: Defective engine controller PWB (KP-801). Defective black developer (black developer PWB [KP-817] or black T/C sensor). Defective black developer. (black toner feed motor does not rotate in the correct revolution.) Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective black developer (black developer PWB [KP-817] or black T/C sensor). Replace the black developer.
Defective black developer. (black toner feed motor does not rotate in the correct revolution.) Replace the black developer.
Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals. Check the continuity of the harness (S02547). Check the insertion of connectors.
Defective black developer (black developer PWB [KP-817] or black T/C sensor). Replace the black developer.
Defective black developer. (black toner feed motor does not rotate in the correct revolution.) Replace the black developer.
Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals. Check the continuity of the harness (S02547). Check the insertion of connectors.