Code: 0460
Description: Communication error between printer and duplex unit
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the duplex unit PD- 30 normally.
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the duplex unit PD- 30 normally.
Causes: Defective engine controller PWB (KP-801). Defective main board of duplex unit PD-30. Defective paper feeder/options relay PWB (KP- 830). Defective connection printer and duplex unit PD-30. Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective main board of duplex unit PD-30. Replace the main board of duplex unit PD- 30. See duplex unit PD-30’s service manual.
Defective paper feeder/options relay PWB (KP- 830). Replace the paper feeder/options relay PWB (KP-830).
Defective connection printer and duplex unit PD-30. Reinstall duplex unit PD-30.
Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals. Check the continuity of the harness (S02591). Check the insertion of connectors.
Defective main board of duplex unit PD-30. Replace the main board of duplex unit PD- 30. See duplex unit PD-30’s service manual.
Defective paper feeder/options relay PWB (KP- 830). Replace the paper feeder/options relay PWB (KP-830).
Defective connection printer and duplex unit PD-30. Reinstall duplex unit PD-30.
Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals. Check the continuity of the harness (S02591). Check the insertion of connectors.