Code: 2020
Description: Main drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency since ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the main drive motor.r
• The FG (Frequency generation) pulse does not reach the correct frequency since ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the main drive motor.r
Causes: Defective main drive motor. Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals.
Remedy: Defective main drive motor. Replace the main drive motor.
Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Check if the drum unit or primary transfer unit rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02571). Check the insertion of connectors.
Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Check if the drum unit or primary transfer unit rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02571). Check the insertion of connectors.