Code: 2102
Description: Color developers drive motor lock
• The FG (Frequency generation) pulse which the color developers drive motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PWB (KP-801) during normal operation (after selfdiagnostics codes 2112 and 2122 are cleared).
• The FG (Frequency generation) pulse which the color developers drive motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PWB (KP-801) during normal operation (after selfdiagnostics codes 2112 and 2122 are cleared).
Causes: Defective engine controller PWB (KP-801). Defective color developers drive motor. Excessive torque for driving color developers. (Overloaded by a damaged gear.) Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors