Code: 2122
Description: Color developers drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor that drives the color developers.
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor that drives the color developers.
Causes: Defective engine controller PWB (KP-801). Defective color developers drive motor. Excessive torque for driving color developers. (Overloaded by a damaged gear.) Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors.
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors.