Code: 7103
Description: Magenta T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
Causes: Defective engine controller PWB (KP-801). Defective magenta developer (magenta developer PWB [KP-815] or magenta T/C sensor). Defective magenta developer. (magenta toner feed motor does not rotate in the correct revolution.) Defective harness (S02546) between engine controller PWB (KP-801) and magenta developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective magenta developer (magenta developer PWB [KP-815] or magenta T/C sensor). Replace the magenta developer.
Defective magenta developer. (magenta toner feed motor does not rotate in the correct revolution.) Replace the magenta developer.
Defective harness (S02546) between engine controller PWB (KP-801) and magenta developer, or poor contact of the connector terminals. Check the continuity of the harness (S02546). Check the insertion of connectors.
Defective magenta developer (magenta developer PWB [KP-815] or magenta T/C sensor). Replace the magenta developer.
Defective magenta developer. (magenta toner feed motor does not rotate in the correct revolution.) Replace the magenta developer.
Defective harness (S02546) between engine controller PWB (KP-801) and magenta developer, or poor contact of the connector terminals. Check the continuity of the harness (S02546). Check the insertion of connectors.