Code: 0450
Description: Communication error between printer and bulk stacker
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the bulk stacker ST-31 normally.
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the bulk stacker ST-31 normally.
Causes: Defective engine controller PWB (KP-801). Defective main board of bulk stacker ST-31. Defective paper feeder/options relay PWB (KP- 830). Defective signal cable between bulk stacker ST- 31. Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective main board of bulk stacker ST-31. Replace the main board of bulk stacker ST- 31. See bulk stacker ST-31’s service manual.
Defective paper feeder/options relay PWB (KP- 830). Replace the paper feeder/options relay PWB (KP-830).
Defective signal cable between bulk stacker ST- 31. Replace the signal cable between printer and bulk stacker ST-31.
Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals. Check the continuity of the harness (S02591). Check the insertion of connectors.
Defective main board of bulk stacker ST-31. Replace the main board of bulk stacker ST- 31. See bulk stacker ST-31’s service manual.
Defective paper feeder/options relay PWB (KP- 830). Replace the paper feeder/options relay PWB (KP-830).
Defective signal cable between bulk stacker ST- 31. Replace the signal cable between printer and bulk stacker ST-31.
Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals. Check the continuity of the harness (S02591). Check the insertion of connectors.