Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6120 — Kyocera FS8000CN

Code: 6120

Description: Press/heat roller abnormal high temperature
• The temperature on the press/heat roller has risen up to the predetermined abnormal temperature.
Causes: Defective engine controller PWB (KP-801). Defective lower heater lamp. Defective fuser PWB (KP-811). Defective lower fuser thermistor. Defective power supply unit. Defective AC power source (Abnormal high voltage). Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective lower heater lamp. Replace the fuser unit (lower heater lamp).
Defective fuser PWB (KP-811). Replace the fuser unit (lower thermostat).
Defective lower fuser thermistor. Replace the lower fuser thermistor.
Defective power supply unit. Replace the power supply unit.
Defective AC power source (Abnormal high voltage). Connect to the proper AC power source.
Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals. Check the continuity of the harness (S02572). Check the insertion of connectors.

← Xem tất cả mã lỗi Kyocera FS8000CN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie