Code: 7102
Description: Cyan T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
Causes: Defective engine controller PWB (KP-801). Defective cyan developer (cyan developer PWB [KP-815] or cyan T/C sensor). Defective cyan developer. (cyan toner feed motor does not rotate in the correct revolution.) Defective harness (S02547) between engine controller PWB (KP-801) and cyan developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective cyan developer (cyan developer PWB [KP-815] or cyan T/C sensor). Replace the cyan developer.
Defective cyan developer. (cyan toner feed motor does not rotate in the correct revolution.) Replace the cyan developer.
Defective harness (S02547) between engine controller PWB (KP-801) and cyan developer, or poor contact of the connector terminals. Check the continuity of the harness (S02547). Check the insertion of connectors.
Defective cyan developer (cyan developer PWB [KP-815] or cyan T/C sensor). Replace the cyan developer.
Defective cyan developer. (cyan toner feed motor does not rotate in the correct revolution.) Replace the cyan developer.
Defective harness (S02547) between engine controller PWB (KP-801) and cyan developer, or poor contact of the connector terminals. Check the continuity of the harness (S02547). Check the insertion of connectors.