Code: 7104
Description: Yellow T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
Causes: Defective engine controller PWB (KP-801). Defective yellow developer (yellow developer PWB [KP-815] or yellow T/C sensor). Defective yellow developer. (yellow toner feed motor does not rotate in the correct revolution.) Defective harness (S02546) between engine controller PWB (KP-801) and yellow developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective yellow developer (yellow developer PWB [KP-815] or yellow T/C sensor). Replace the yellow developer.
Defective yellow developer. (yellow toner feed motor does not rotate in the correct revolution.) Replace the yellow developer.
Defective harness (S02546) between engine controller PWB (KP-801) and yellow developer, or poor contact of the connector terminals. Check the continuity of the harness (S02546). Check the insertion of connectors.
Defective yellow developer (yellow developer PWB [KP-815] or yellow T/C sensor). Replace the yellow developer.
Defective yellow developer. (yellow toner feed motor does not rotate in the correct revolution.) Replace the yellow developer.
Defective harness (S02546) between engine controller PWB (KP-801) and yellow developer, or poor contact of the connector terminals. Check the continuity of the harness (S02546). Check the insertion of connectors.