Code: 2102
Description: Developing motor CMY error
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals. Defective drive transmission system. Defective engine PWB. Defective developing motor CMY.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC26 on the engine PWB and the connector on the developing motor CMY, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Run maintenance item U030 and check if YC26-13 (remote signal) on the engine PWB goes low. If not, replace the engine PWB.
Defective developing motor CMY. Run maintenance item U030 and check if the developing motor CMY operates when YC26-13 (remote signal) on the engine PWB goes low. If not, replace the developing motor CMY.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Run maintenance item U030 and check if YC26-13 (remote signal) on the engine PWB goes low. If not, replace the engine PWB.
Defective developing motor CMY. Run maintenance item U030 and check if the developing motor CMY operates when YC26-13 (remote signal) on the engine PWB goes low. If not, replace the developing motor CMY.