Code: 5301
Description: Cleaning lamp BK break error
After the cleaning lamp BK ON signal is turned on, the cleaning lamp BK break signal is detected continuously 5 times for 10 ms.
After the cleaning lamp BK ON signal is turned on, the cleaning lamp BK break signal is detected continuously 5 times for 10 ms.
Causes: Poor contact in the connector terminals. Defective cleaning lamp BK. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC18 on the engine PWB and the connector on the drum unit BK, and the continuity across the connector terminals. Repair or replace if necessary.
Defective cleaning lamp BK. Replace the drum unit BK.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective cleaning lamp BK. Replace the drum unit BK.
Defective engine PWB. Replace the engine PWB and check for correct operation.