Code: 5303
Description: Cleaning lamp M break error
After the cleaning lamp M ON signal is turned on, the cleaning lamp M break signal is detected continuously 5 times for 10 ms.
After the cleaning lamp M ON signal is turned on, the cleaning lamp M break signal is detected continuously 5 times for 10 ms.
Causes: Poor contact in the connector terminals. Defective cleaning lamp M. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC17 on the engine PWB and the connector on the drum unit M, and the continuity across the connector terminals. Repair or replace if necessary.
Defective cleaning lamp M. Replace the drum unit M.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective cleaning lamp M. Replace the drum unit M.
Defective engine PWB. Replace the engine PWB and check for correct operation.