Code: 6050
Description: Abnormally low fuser thermistor 3 temperature
During printing, the temperature at the heat roller lower than 100 °C/212 °F is detected continuously for 1 s.
During printing, the temperature at the heat roller lower than 100 °C/212 °F is detected continuously for 1 s.
Causes: Defective fuser heater 1/2. Defective PWB.
Remedy: Defective fuser heater 1/2. Replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.