Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6400 — Kyocera FS9120DN

Code: 6400

Description: Zero-crossing signal problem
• The engine controller PWB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below. At power-on: 5 s Others: 5 s
Causes: Poor contact in the connector terminals. Defective power supply unit. Defective engine controller PWB.
Remedy: Check the connection of connectors YC1-3 on the engine controller PWB and YC2-6 on the power supply unit, and the continuity across the connector terminals. Repair or replace if necessary. Check if the zero-crossing signal is output from YC2-6 on the power supply unit. If not, replace the power supply unit. Replace the engine controller PWB if C6400 is detected while YC2-6 on the power supply unit outputs the zero-crossing signal.

← Xem tất cả mã lỗi Kyocera FS9120DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie