Code: 2250
Description: Main charger cleaning motor error
The lock signal is detected.
The lock signal is detected.
Causes: Poor contact in the connector terminals. Defective drive transmission system. Defective engine PWB. Defective main charger cleaning motor.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC9 on the engine PWB and the connector on the main charger cleaning motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective engine PWB. Replace the engine PWB and check for correct operation. Defective main charger cleaning motor. Replace the main charger cleaning motor.