Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8140 — Kyocera FS9130DN

Code: 8140

Description: Main tray problem (optional 3000- sheet document finisher)
The main tray is not detected by the main tray top limit detection sensor or the main tray capacity detection sensor within 20s since the tray has started ascending. The main tray upper limit detection sensor to the main tray load detection sensor is not detected to be turned off in 20 seconds after the main tray has descended. The main tray low limit detection sensor is not detected to be turned on in 20 seconds after the main tray has descended. During main tray ascent, the main tray upper limit detection sensor or the main tray load detection sensor stays on for more than 2 s.
Causes: Poor contact in the connector terminals. Defective main tray motor. Defective main tray upper limit detection sensor/main tray load detection sensor/main tray lower limit detection sensor. Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the finisher main PWB and the connector on the main tray motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective main tray motor. Replace the main tray motor. Defective main tray upper limit detection sensor/main tray load detection sensor/main tray lower limit detection sensor. Replace the sensor. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera FS9130DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie