Code: 6030
Description: Fuser thermistor break error
The thermistor break signal is detected continuously for 500 ms.
The thermistor break signal is detected continuously for 500 ms.
Causes: Installation defectiveness on fuser thermistor 1 or 2. Defective fuser thermistor 1 or 2. Defective engine PWB.
Remedy: Installation defectiveness on fuser thermistor 1 or 2. Check the mounting state of the fuser thermistor 1 or 2. If any problem is found, repair it. Defective fuser thermistor 1 or 2. Replace the fuser thermistor 1 or 2. Defective engine PWB. Replace the engine PWB and check for correct operation.