Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0460 — Kyocera FSC5016N

Code: 0460

Description: Duplexer communication error
• When turning on power, the ASIC of the engine controller PWB (KP-1054) recognized the optional duplexer DU- 300, but when it becomes not be able to communicate from the middle. After the error occurring, when power source is turned on/off, there are times when the duplexer is not recognized.
Causes: Defective engine controller PWB (KP-1054). Defective duplexer DU-300. Defective paper feeder PF-60. Defective harness (S02852) between engine controller PWB (KP-1054) and interface connector, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-1054). Replace the engine controller PWB (KP- 1054). Defective duplexer DU-300. After removing or replacing the duplexer DU-300, do the operation check. If operation is normal, replace the Duplexer DU-300. Defective paper feeder PF-60. If the optional paper feeder PF-60 is installed, after removing or replacing the paper feeder PF-60, do the operation check. If operation is normal, replace the paper feeder PF-60. Defective harness (S02852) between engine controller PWB (KP-1054) and interface connector, or poor contact of the connector terminals. Check the continuity of the harness (S02852). Check the insertion of YC7 of the engine controller PWB, if there is trouble, remedy or replace.

← Xem tất cả mã lỗi Kyocera FSC5016N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie