Code: 6100
Description: Fuser temperature time-out error (press roller)
• Doing the control which turns on the fuser heater lamp 2 which is built in to the press roller of the fuser unit, the fuser temperature which fuser thermistor 2 detects stipulated temperature did not rise within stipulated time.
• Doing the control which turns on the fuser heater lamp 2 which is built in to the press roller of the fuser unit, the fuser temperature which fuser thermistor 2 detects stipulated temperature did not rise within stipulated time.
Causes: Defective installation condition of fuser thermistor 2. Fuser thermostat 2 operated. Defective engine controller PWB (KP-1054). Defective power supply PWB. Defective fuser PWB (KP-970). Defective harness of the fuser thermistor 2, or poor contact of the connector terminals. Defective fuser heater lamp 2. Defective harness (S02857: 220 - 240 V AC model, S02858: 120 V AC model) between fuser unit connector and fuser heater lamp 2. Defective harness (S02856) between fuser unit connector and power supply PWB.
Remedy: Defective installation condition of fuser thermistor 2. Check the installation condition of fuser thermistor 2,if there is trouble, remedy or replace. Fuser thermostat 2 operated. Replace the Fuser thermostat 2. Defective engine controller PWB (KP-1054). Replace the engine controller PWB (KP- 1054). Defective power supply PWB. Replace the power supply PWB. Defective fuser PWB (KP-970). Replace the fuser PWB (KP-970). Defective harness of the fuser thermistor 2, or poor contact of the connector terminals. Check the harness of the fuser thermistor 1, check the connection YC693 connector of the fuser PWB (KP-970), if there is trouble, remedy or replace. Defective fuser heater lamp 2. Replace the fuser heater lamp 2. Defective harness (S02857: 220 - 240 V AC model, S02858: 120 V AC model) between fuser unit connector and fuser heater lamp 2. Check the continuity of the harness (S02857: 220 - 240 V AC model, S02858: 120 V AC model), check the connection YC693 connector of the fuser PWB (KP- 970), if there is trouble, remedy or replace. Defective harness (S02856) between fuser unit connector and power supply PWB. Check the continuity of the harness (S02856), check the connection CN2 connector of the power supply PWB, if there is trouble, remedy or replace.