Code: 7403
Description: Cyan developer unit non- installing error
• The toner sensor 2 inside the cyan developer unit did not output the density detection signal, judged the engine controller PWB (KP-1054) the cyan developer unit is not installed.
• The toner sensor 2 inside the cyan developer unit did not output the density detection signal, judged the engine controller PWB (KP-1054) the cyan developer unit is not installed.
Causes: Defective harness of the toner sensor 2, defective connection of the connector between cyan developer unit and the printer main unit or poor contact of the connector terminals. Defective toner sensor 2. Defective engine controller PWB (KP-1054). Defective engine relay PWB (KP- 966).
Remedy: Defective harness of the toner sensor 2, defective connection of the connector between cyan developer unit and the printer main unit or poor contact of the connector terminals. Check the damage of harness of the toner sensor 2, check the connection of the connector with the cyan developer unit and the printer main unit, if there is trouble, remedy or replace. Defective toner sensor 2. Replace the cyan developer unit. Defective engine controller PWB (KP-1054). Replace the engine controller PWB (KP- 1054). Defective engine relay PWB (KP- 966). Replace the engine relay PWB (KP-966).