Code: 7414
Description: Yellow drum unit non- installing error
• The EEPROM (U401) on the drum PWB 3 (KP-972) inside the yellow drum unit does not communicate normally.
• The EEPROM (U401) on the drum PWB 3 (KP-972) inside the yellow drum unit does not communicate normally.
Causes: Defective harness between drum PWB 3 (KP-972) and printer main unit or poor contact of the connector terminals. Defective drum PWB 3 (KP-972). Defective LED print heads relay PWB (KP-1048). Defective LED print heads relay PWB (KP-1048). Defective harness (S02869) between engine controller PWB (KP-1054) and LED print heads relay PWB (KP-1048) or poor contact of the connector terminals.
Remedy: Defective harness between drum PWB 3 (KP-972) and printer main unit or poor contact of the connector terminals. Check the connection of the magenta drum unit and the printer main unit, check the continuity of the harness (S02867), if there is trouble, remedy or replace. Defective drum PWB 3 (KP-972). Replace the drum PWB 3 (KP-972). Defective LED print heads relay PWB (KP-1048). Replace the engine controller PWB (KP- 1054). Defective LED print heads relay PWB (KP-1048). Replace the LED print heads relay PWB (KP-1048). Defective harness (S02869) between engine controller PWB (KP-1054) and LED print heads relay PWB (KP-1048) or poor contact of the connector terminals. Check the continuity of the harness (S02869), check the connection YC3 connector of the engine controller PWB (KP- 1054), if there is trouble, remedy or replace.