Code: 0480
Description: Duplexer firmware error
When turning on power, the ASIC of the engine controller PWB (A0004) recognized the optional duplexer, but the firmware checksum error is reported from the duplexer. The duplexer is not recognized because of the defective firmware.
When turning on power, the ASIC of the engine controller PWB (A0004) recognized the optional duplexer, but the firmware checksum error is reported from the duplexer. The duplexer is not recognized because of the defective firmware.
Causes: Defective duplexer.
Remedy: Defective duplexer. After removing or replacing the duplexer, do the operation check. If operation is normal, replace the duplexer.