Code: 0460
Description: Duplexer communication error
When turning on power, the ASIC of the engine controller PWB (A0004) recognized the optional duplexer, but when it becomes not be able to communicate from the middle. After the error occurring, when power source is turned on/off, there are times when the duplexer is not recognized.
When turning on power, the ASIC of the engine controller PWB (A0004) recognized the optional duplexer, but when it becomes not be able to communicate from the middle. After the error occurring, when power source is turned on/off, there are times when the duplexer is not recognized.
Causes: Defective engine controller PWB (A0004). Defective duplexer. Defective paper feeder. Defective harness (S03202) between engine controller PWB (A0004) and interface connector, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective duplexer. After removing or replacing the duplexer, do the operation check. If operation is normal, replace the duplexer. Defective paper feeder. If the optional paper feeder is installed, after removing or replacing the paper feeder, do the operation check. If operation is normal, replace the paper feeder. Defective harness (S03202) between engine controller PWB (A0004) and interface connector, or poor contact of the connector terminals. Check the continuity of the harness (S03202). Check the insertion of YC7 of the engine controller PWB, if there is trouble, remedy or replace.