Code: 9530
Description: Backup data error
The serial number of the machine written on the EEPROM of the engine controller PWB (A0004) differs with that is written on both the flash memory of the engine controller PWB (A0004) and the EEPROM of the drum PWB as a backup.
The serial number of the machine written on the EEPROM of the engine controller PWB (A0004) differs with that is written on both the flash memory of the engine controller PWB (A0004) and the EEPROM of the drum PWB as a backup.
Causes: Replacing both the engine controller PWB (A0004) and the drum unit at the same time.
Remedy: Replacing both the engine controller PWB (A0004) and the drum unit at the same time. Check that the machine operates properly by reverting the engine controller and the drum unit to the old ones. To replace the engine controller PWB (A0004) and the drum unit at the same time, turn on the printer after replacing either one. Check that the printer operates properly and then turn off the printer. Replace the other and turn on the printer to check that the printer operates properly. Be sure to replace one by one.