Code: 7403
Description: Developing unit M non-installing error
No density detection signal is output from toner sensor M in developing unit M.
No density detection signal is output from toner sensor M in developing unit M.
Causes: Defective harness between developing unit M and drum relay PWB (YC13), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective toner sensor M. Defective engine PWB.
Remedy: Defective harness between developing unit M and drum relay PWB (YC13), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective toner sensor M. Replace the developing unit M.
Defective engine PWB. Replace the engine PWB.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective toner sensor M. Replace the developing unit M.
Defective engine PWB. Replace the engine PWB.