Code: 2250
Description: Main charger cleaning motor error
A main charger cleaning motor over-current signal is detected for 5 seconds in total while the main charger cleaning motor is ON.
A main charger cleaning motor over-current signal is detected for 5 seconds in total while the main charger cleaning motor is ON.
Causes: Defective harness between main charger cleaning motor and engine PWB (YC36), or improper connector insertion. MCY. Defective drive transmission system of the main charger cleaning motor.C36), Defective main charger cleaning motor. Defective engine PWB.
Remedy: Defective harness between main charger cleaning motor and engine PWB (YC36), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective drive transmission system of the main charger cleaning motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main charger cleaning motor. Replace the main charger cleaning motor.
Defective engine PWB. Replace the engine PWB.
Defective drive transmission system of the main charger cleaning motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main charger cleaning motor. Replace the main charger cleaning motor.
Defective engine PWB. Replace the engine PWB.