Code: 2830
Description: Developing motor K error
The ready signal cannot be detected within 5 seconds after the developing motor K turns on.
The ready signal cannot be detected within 5 seconds after the developing motor K turns on.
Causes: Defective harness between developing motor K and engine PWB (YC26), or improper connector insertion. Defective drive transmission system of the developing motor K. Defective developing motor K. Defective engine PWB.
Remedy: Defective harness between developing motor K and engine PWB (YC26), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder).
Defective drive transmission system of the developing motor K. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective developing motor K. Replace the developing motor K.
Defective engine PWB. Replace the engine PWB.
Defective drive transmission system of the developing motor K. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective developing motor K. Replace the developing motor K.
Defective engine PWB. Replace the engine PWB.