Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 5303 — Kyocera FSC5350DN

Code: 5303

Description: Broken eraser lamp M wire
When the eraser lamp M is driven, the eraser lamp M over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals.
Causes: Defective harness between drum unit M and drum relay PWB (YC11/ YC12), or improper connector insertion. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Defective eraser lamp M. Defective engine PWB.
Remedy: Defective harness between drum unit M and drum relay PWB (YC11/ YC12), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective eraser lamp M. Replace the drum unit M.
Defective engine PWB. Replace the engine PWB.

← Xem tất cả mã lỗi Kyocera FSC5350DN

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie