Code: 2330
Description: Fuser pressure change motor (overcurrent) error
When the fuser pressure change motor is driven, the fuser pressure change motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
When the fuser pressure change motor is driven, the fuser pressure change motor over-current detection signal is detected continuously for 8 times (800 ms) at 100 ms intervals.
Causes: Defective harness between fuser pressure change motor and engine PWB (YC615), or improper connector insertion. Defective drive transmission system of the fuser pressure change motor. Defective fuser pressure change motor. Defective engine PWB.
Remedy: Defective harness between fuser pressure change motor and engine PWB (YC615), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective drive transmission system of the fuser pressure change motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective fuser pressure change motor. Replace the fuser pressure change motor.
Defective engine PWB. Replace the engine PWB.
Defective drive transmission system of the fuser pressure change motor. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective fuser pressure change motor. Replace the fuser pressure change motor.
Defective engine PWB. Replace the engine PWB.