Code: 2340
Description: Fuser pressure change motor (timeout) error
After the fuser pressure change motor is driven, the ON status of the fuser pressure change sensor cannot be detected for 6 seconds.
After the fuser pressure change motor is driven, the ON status of the fuser pressure change sensor cannot be detected for 6 seconds.
Causes: Defective harness between fuser pressure change motor and paper exit PWB (YC8), or improper connector insertion. Defective fuser pressure change sensor. Defective engine PWB. Defective paper exit PWB.
Remedy: Defective harness between fuser pressure change motor and paper exit PWB (YC8), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective fuser pressure change sensor. Replace the fuser pressure change sensor.
Defective engine PWB. Replace the engine PWB.
Defective paper exit PWB. Replace the paper exit PWB.
Defective fuser pressure change sensor. Replace the fuser pressure change sensor.
Defective engine PWB. Replace the engine PWB.
Defective paper exit PWB. Replace the paper exit PWB.