Code: 6130
Description: Broken fuser thermistor 2 wire
Input from fuser thermistor 1 is 3 or less (A/D value) continuously for 1 second (5.5 ms x 182 times).
Input from fuser thermistor 1 is 3 or less (A/D value) continuously for 1 second (5.5 ms x 182 times).
Causes: Defective harness between fuser thermistor 1 and paper exit PWB (YC5), or improper connector insertion. Defective harness between paper exit PWB (YC1) and engine PWB (YC602), or improper connector insertion. Broken fuser thermistor 1 wire. Fuser thermistor 1 installed incorrectly. Defective engine PWB.
Remedy: Defective harness between fuser thermistor 1 and paper exit PWB (YC5), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective harness between paper exit PWB (YC1) and engine PWB (YC602), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Broken fuser thermistor 1 wire. Replace the fuser unit.
Fuser thermistor 1 installed incorrectly. Replace the fuser unit.
Defective engine PWB. Replace the engine PWB.
Defective harness between paper exit PWB (YC1) and engine PWB (YC602), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Broken fuser thermistor 1 wire. Replace the fuser unit.
Fuser thermistor 1 installed incorrectly. Replace the fuser unit.
Defective engine PWB. Replace the engine PWB.