Code: 0450
Description: Communication error between printer and bulk stacker
• The CPU (U2) of engine controller PWB (KP-992) does not communicate with the ST-30 bulk stacker normally.
• The CPU (U2) of engine controller PWB (KP-992) does not communicate with the ST-30 bulk stacker normally.
Causes: Defective engine controller PWB (KP-992). Defective main board of ST-30 bulk stacker. Defective paper feeder/options relay PWB (KP- 995). Defective signal cable between ST-30 bulk stacker. Defective harness (2CK2719) between engine controller PWB (KP-992) and paper feeder/ options relay PWB (KP-995), or poor contact of the connector terminals.
Remedy: Replace the engine controller PWB (KP- 992). Replace the main board of ST-30 bulk stacker. See ST-30 bulk stacker’s service manual. Replace the paper feeder/options relay PWB (KP-995). Replace the signal cable between printer and ST-30 bulk stacker. Check the continuity of the harness (2CK2719). Check the insertion of connectors.