Code: 6000
Description: Heat roller heating time-out 1
• The temperature on the heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PWB (KP-992) has turned on the upper heater lamp. This is detected when the upper heater lamp is turned on.
• The temperature on the heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PWB (KP-992) has turned on the upper heater lamp. This is detected when the upper heater lamp is turned on.
Causes: Defective engine controller PWB (KP-992). Defective upper heater lamp. Defective upper thermostat. Defective fuser PWB (KP-997). Defective upper fuser thermistor, or fitting is not proper. Defective power supply unit. Defective harness (2CK2719, 2CK2712) between engine controller PWB (KP-992) and paper feeder/ options relay PWB (KP-995) and fuser unit, or poor contact of the connector terminals.
Remedy: Replace the engine controller PWB (KP- 992). Replace the fuser unit (upper heater lamp). Replace the fuser unit (upper thermostat). Replace the fuser unit (fuser PWB [KP- 997]). Replace the fuser unit (upper fuser thermistor). Replace the power supply unit. Check the continuity the harness (2CK2719, 2CK2712). Check the insertion of connectors.