Code: 7102
Description: Cyan T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
Causes: Defective engine controller PWB (KP-992). Defective cyan developer (cyan developer PWB [KP-1003] or cyan T/C sensor). Defective cyan developer. (Cyan toner feed motor does not rotate in the correct revolution.) Defective harness (2CK2702, 2CK2705) between engine controller PWB (KP-992) and cyan developer, or poor contact of the connector terminals.
Remedy: Replace the engine controller PWB (KP- 992). Replace the cyan developer. See page 1- 6-16. Replace the cyan developer. See page 1- 6-16. Check the continuity of the harness (2CK2702, 2CK2705). Check the insertion of connectors.