Code: 7101
Description: Black T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
Causes: Defective engine controller PWB (KP-992). Defective black developer (black developer PWB [KP-1003] or black T/C sensor). Defective black developer. (Black toner feed motor does not rotate in the correct revolution.) Defective harness (2CK2708, 2CK2714) between engine controller PWB (KP-992) and black developer, or poor contact of the connector terminals.
Remedy: Replace the engine controller PWB (KP- 992). Replace the black developer. See page 1- 6-16. Replace the black developer. See page 1- 6-16. Check the continuity of the harness (2CK2708, 2CK2714). Check the insertion of connectors.