Code: 7103
Description: Magenta T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 992).
Causes: Defective engine controller PWB (KP-992). Defective magenta developer (magenta developer PWB [KP-1003] or magenta T/C sensor). Defective magenta developer. (Magenta toner feed motor does not rotate in the correct revolution.) Defective harness (2BM2854, 2CK2704) between engine controller PWB (KP-992) and magenta developer, or poor contact of the connector terminals
Remedy: Replace the engine controller PWB (KP- 992). Replace the magenta developer. Replace the magenta developer. Check the continuity of the harness (2BM2854, 2CK2704). Check the insertion of connectors.