Code: 7104
Description: Yellow T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801).
Causes: Defective engine controller PWB (KP-992). Defective yellow developer (yellow developer PWB [KP-1001] or yellow T/C sensor). Defective yellow developer. (Yellow toner feed motor does not rotate in the correct revolution.) Defective harness (2BM2854, 2CK2703) between engine controller PWB (KP-992) and yellow developer, or poor contact of the connector terminals.
Remedy: Replace the engine controller PWB (KP- 992). Replace the yellow developer. See page 1- 6-16. Replace the yellow developer. See page 1- 6-16. Check the continuity of the harness (2BM2854, 2CK2703). Check the insertion of connectors.