Code: 6420
Description: Fuser fuse cut error
• After a new fuser unit is installed and the fuse cut signal is turned on and then the fuse cut signal is turned off after 3,000 ms, the fuse cannot be cut.
• After a new fuser unit is installed and the fuse cut signal is turned on and then the fuse cut signal is turned off after 3,000 ms, the fuse cannot be cut.
Causes: Fuser unit is not conformed. Defective engine controller PWB.
Remedy: Fuser unit is not conformed. Check parts number of fuser unit and install correct unit.
Defective engine controller PWB. Replace the engine controller PWB.
Defective engine controller PWB. Replace the engine controller PWB.