Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2700 — Kyocera FSC8026N

Code: 2700

Description: Transfer lift motor error
• Even if 5,000 ms elapse after the transfer lift motor drive signal is turned on, the transfer lift home position sensor is not turned on. • Even if 5,000 ms elapse after the transfer lift motor drive ON signal is output, the transfer lift home position sensor is not turned off.
Causes: Poor contact in the connector terminals. Defective transfer lift home position sensor. Defective transfer lift motor. Misfeed in the conveying section or fuser section.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC4 on the engine controller PWB or connectors YC1 and YC2 on the transfer relay PWB for any problem, and repair them if any problem is found.
Defective transfer lift home position sensor. Replace the transfer roller lift home position sensor.
Defective transfer lift motor. Replace the transfer roller lift motor.
Misfeed in the conveying section or fuser section. Remove the jammed paper completely.

← Xem tất cả mã lỗi Kyocera FSC8026N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie